ER-12 - SEALMASTER
- Bore / Inner Diameter Inch: 0.75
- Bore / Inner Diameter MM: 19.05
- Outside Diameter Inch: 1.85
- Outside Diameter MM: 46.99
- Outer Race Width Inch: 0.625
- Outer Race Width MM: 15.875
- Seal Type: Felt
- Snap Ring: Yes
The SealMaster ER-12 insert bearing is a stand-alone, sturdy bearing that can be mounted without any additional locknuts or adapters. With an overall weight of merely 0.56 pounds, it is an easily maneuverable ring that provides additional support for the shaft. The outside diameter, which measures at 1.85 inches, is further accompanied by a 0.75-inch bore.
As a cylindrical bearing that can be relubricated, the SealMaster ER-12 has a long-lasting life cycle. It is compatible with the ball rolling element that falls into the snap ring of the felt-based-style seal. The locking mechanism that ensures that the 1.219-inch-long bore stays in place is a set screw. The SealMaster ER-12 will handle a wide range of temperatures that go as low as -20 degrees and as high as 220 degrees Fahrenheit. One of its most common purposes is within conveyors where it retains the lubricant and minimizes potential damage to the ball bearing.
SPECIFICATIONS
Bore / Inner Diameter Inch | 0.75 |
---|---|
Bore / Inner Diameter MM | 19.05 |
Outside Diameter Inch | 1.85 |
Outside Diameter MM | 46.99 |
Outer Race Width Inch | 0.625 |
Outer Race Width MM | 15.875 |
Seal Type | Felt |
Snap Ring | Yes |
Bearing Locking Style | Set Screw |
Length Across Bore Inch | 1.219 |
Length Across Bore MM | 30.963 |
Relubricatable | Yes |
Rolling Element | Ball Bearing |
Inner Race Profile | Wide Inner Ring |
Bearing Profile | Cylindrical |