OWP445T-100-8 - NORTH AMERICAN
- HP: 100
- Phase: Three
- Full Load RPM: 855
- Enclosure: TEFC
NEMA DESIGN D
- Maximum 5-13% Slip
- Low Starting Current
- Very High Locked Rotor Torque
- Suited For Equipment With Very High Inertia Starts - Like Cranes, Hoists Etc.
SPECIFICATIONS
Material | Cast Iron |
---|---|
Full Load RPM | 855.0 |
RPM | 900.0 |
Frame | 445T |
Full Load Amps at Rated Voltage | 379.0 |
Frequency Hz | 60.0 |
Voltage | 230/460/796 VAC|230 VAC|460 VAC|796 VAC |
Full Load Efficiency Percentage | 95.8 |
Service Factor | 1.15 |
Insulation Class | F |
NEMA Design | D |
NEMA Code | G |
Locked Rotor Amps at Rated Voltage | 725.0 |
Power Factor | 0.82 |
Drive End Bottom Bearing | NU318 |
Opposite Drive End Upper Bearing | 6322 |
Drive End Upper Bearing | 7236B/DT |
Opposite Drive End Bottom Bearing | 6322 |
Inverter Rated or Duty | Inverter Duty |
Phase | Three Phase |
Model Number | OWP445T-100-8 |
Weight (lbs) | 1614.0 |
Application | Oil Well Pump |
HP Range | 100.0 |
HP | 100.0 |
GTIN | 192999028490 |
Motor Enclosure Type | Totally Enclosed|TEFC |
RPM Range | 900.0 |